Getting Started

Default solution folder, feel free to edit or delete it.


  • Congratulations on receiving your USCutter vinyl cutting machine! Here is a compilation of some of the main things you might...

    2019-02-20 09:43:20 -0800

  • You can access demos for the cutting softwares VinylMaster and Sure Cuts A Lot 3 Pro is you want to...

    2019-01-14 15:51:49 -0800

  • First off, thanks for your interest in USCutter, you are at the right place for all of your vinyl cutter...

    2016-07-19 13:50:09 -0700

  • The bare essentials for putting heat transfer vinyl on a shirt are a Vinyl Cutter to cut your design, the Heat Transfer Vinyl,...

    2016-06-06 14:12:15 -0700

  • Regardless of the max cutting size of your equipment, you can always use smaller materials in your cutter, you just...

    2018-07-11 07:31:37 -0700

  • Determining the type of Application Tape you'll want to use for a given vinyl product is very subjective in most cases. Gloss...

    2016-06-03 07:21:24 -0700

  • The standard pressure setting for your cutter is 100 for non-servo cutters(MH, SC series, Laserpoint Series, TITAN 1), and 60...

    2019-04-04 08:37:56 -0700

  • All of the cutters, design software, and cutting software that we carry and sell are compatible with Windows 10 operating...

    2019-08-09 15:32:22 -0700

  • USCutter does not support graphic design in any way. Graphic design would be things like adding shadows, frames, working with...

    2019-01-30 09:52:36 -0800

  • Before contacting USCutter locate your product section and see if your question is already answered. Our most common telephone questions...

    2019-01-30 09:56:36 -0800

Websites

Policies

Social Media

Contact Information